42
Following is an example in which the function LEDs are used to set fre-
quency reference, acceleration time, deceleration time, and motor direc-
tion.
Operation Steps Operator
Display
Function
Indicators
Status
Indicators
1. Turn ON the power supply. 0.0
2. Set constant n03 to 1. 1
3. Set the following constants.
n16: 15.0 (Acceleration Time)
n17: 5.0 (Deceleration Time)
15.0
5.0
4. Select forward or reverse run by pressing
the or key.
Examine the application. (Never
select REV when reverse run is pro-
hibited.)
(Forward)
or
(Reverse)
5. Set the reference by pressing the or
key.
60.0
6. Press . 0.0 to 60.0
7. Press to stop.
60.0 to 0.0
FREF
RUN
ALARM
PRGM
RUN
ALARM
PRGM
RUN
ALARM
NOTE
FR
RUN
ALARM
FREF
RUN
ALARM
FOUT
RUN
ALARM
FOUT
RUN
ALARM
RUN
Status indicators :ON :Flashing (long flashing) :Flashing :OFF
To Next Page
Loading...
