User Guide for the CP860 HD IP Conference Phone
88
2. When the first party answers the call, press the Conf soft key to place a new call.
The active call is placed on hold.
3. Enter the number of the second party and then press , , or the Send soft
key.
4. When the second party answers the call, press the Conf soft key again to join all parties in
the conference.
You can create a conference between an active call and a call on hold by pressing the the Conf
soft key.
To set up a conference call with an active call and a call on hold:
1. Establish two calls on the phone.
2. Press or to select an active call.
3. Press the Conf soft key to join the two calls in the conference.
To join more parties in an established conference call:
1. Press the Conf soft key after the conference call is established.
2. Enter the number of the new party and then press , , or the Send soft key.
3. Press the Conf soft key when the party answers.
4. Repeat steps 1 to 3 to join more parties in the established conference call.
During the conference call, you can do the following:
- Press the Hold soft key to place the conference on hold.
- Press the Conf soft key to join more parties in an established conference call.
- Press the Manage soft key, and then press or to select the desired party:
Press the FarMute soft key to mute the party. The muted party can hear everyone, but
no one can hear the muted party.
Press the Remove soft key to remove the selected party from the conference call.
Press the All Split soft key to split the conference call into individual calls on hold.
Press the Back soft key to return to the previous screen.
- Press to mute the conference call, all other participants can hear each other, but they
cannot hear you.
- Press or the EndCall soft key to drop the conference call.
To Next Page
Loading...
