User Guide for the CP860 HD IP Conference Phone
20
Registration
Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you start up your
phone, the phone will be registered and ready for use. If your phone is not registered, you may
have to register it. For more information on how to register your phone, refer to Account
Registration on page 58.
Idle Screen
If the phone has successfully started up, the idle LCD screen is displayed as below.
The idle screen displays the label of the current account, time and date, and four soft keys.
Entering Data and Editing Fields
You can enter data and edit fields using the phone keypad.
Keypad on the phone provides different characters (or numbers) when using the 2aB, abc, Abc,
ABC or 123 input mode. You can change the following input modes to enter data and edit fields
on your phone. When your phone keypad matches the input mode, you can press the keypad
repeatedly to view the character (or number) options and stop to select. When the character (or
number) you want to enter displays in the field, wait for one second, and enter the next
character (or number).
The following table lists the input modes and character (or number) options for the keypad:
Abc
(initials in
capitals)
To Next Page
Loading...
