User Guide for the CP860 HD IP Conference Phone
16
Connecting the Optional PC or Mobile Device
You can connect a PC or mobile device to listen to the PC or mobile audio using your
conference phone.
To connect a PC or mobile device:
1. Connect one end of the 3.5mm jack cable to the PC/mobile port on the phone, and connect
the other end to the headset jack on the mobile device or the AUX/MIC jack on the PC.
Setup Wizard
When the IP phone is first powered on or the phone settings are reset to factory defaults, the
setup wizard will appear on the LCD screen after startup. You can disable this feature. For more
information, contact your system administrator.
Configure the setup wizard:
1. Configure the language for the phone user interface.
The default language is English.
For more information, refer to Language on page 27.
2. Press the Next soft key to continue, or press the Skip soft key to skip the setup wizard and
go to the idle screen.
3. Configure time and date.
For more information, refer to Time & Date on page 28.
4. Press the Next soft key to continue.
5. Configure basic network settings for the WAN port.
For more information, refer to Basic Network Settings on page 18.
To Next Page
Loading...
