Using Your Phone with PSTN Account
133
2. Press or to select the desired value.
3. Press the Save soft key to accept the change.
Note
Basic Call Features
Placing Calls
You can press the off-hook key either before or after entering the number to place a call. You
can also dial an entry from call history, local directory, favorite directory or remote phone book.
For more information, refer to Contact Management on page 35 and Call History Management
on page 49.
The call duration and far-site’s information (name or phone number) are visible on the LCD
screen. In the figure below, the call to 2248 has lasted 53 seconds.
To place a call:
Do one of the following:
- Press to obtain a dial tone (You can press the Switch soft key to select the desired
PSTN account).
Enter the desired number using the keypad.
Press , , or the Send soft key.
- Enter the desired number using the keypad.
Press , , or the Send soft key.
The # key is configured as a send key by default. You can also set the * key as the send key, or
The required flash time may be different in different countries or for different gateways/PBX
servers. For more information, contact your system administrator.
To Next Page
Loading...
