Yealink CP860 - Live Dialpad; Hotline

User Guide for the CP860 HD IP Conference Phone
68
Lock on page 30.
Note
To specify emergency numbers via web user interface:
1. Click on Features->Phone Lock.
2. Enter the emergency number in the Emergency field.
For multiple emergency numbers, enter a comma between every two numbers. The default
emergency numbers are 112, 911 and 110.
3. Click Confirm to accept the change.
Note
Live Dialpad
You can enable live dialpad on the CP860 IP conference phone, which enables the IP phone to
automatically dial out a phone number without the pressing of the send key. You can also
configure a delay, where the phone will dial out the phone number automatically after the
designated period of time.
To enable live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select Enabled from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
Contact your local phone service provider for available emergency numbers in your area.
The IP phone also supports the emergency dialplan, which allows users to make emergency calls
if the phone is locked or unregistered. For more information, contact your system administrator.
Emergency number is configurable via web user interface only.