Using Your Phone with SIP/Cloud Account
91
If Enabled is selected, the Park soft key will display on the LCD screen during a call, and the
Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
It is configured for the Retrieve soft key.
6. Click Confirm to accept the change.
Note
To park a call in FAC mode:
1. During a call, press the Park soft key (You may need to press the More soft key to see the
Park soft key).
- If the call park code is not configured, you need to enter the call park code.
Press , or the Park soft key.
- If the call park code is configured, the phone will dial the configured call park code
shown as below:
2. Do one of the following:
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey Layout.
To Next Page
Loading...
