Using Your Phone with SIP/Cloud Account
93
It is configured for the Retrieve soft key.
6. Click Confirm to accept the change.
Note
To park a call in Transfer mode:
1. During a call, press the Park soft key (You may need to press the More soft key to see the
Park soft key).
- If the call park code is not configured, you need to enter the call park code (e.g., *01).
Press , or the Park soft key. The call will be transferred to the shared
parking lot.
- If the call park code is configured, the call will be directly transferred to the shared
parking lot.
Note
To retrieve a parked call in Transfer mode:
1. Do one of the following:
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select Disabled from
the pull-down list of Custom Softkey via web user interface at path Settings->Softkey Layout.
For some servers, the system will return a specific call park retrieve number (park retrieve code)
from which the call can be retrieved after parking successfully.
To Next Page
Loading...
