Yealink CP860 - Page 142

User Guide for the CP860 HD IP Conference Phone
130
Muting or Un-muting the PC or Mobile Audio
You can mute the PC or mobile audio so that the other party cannot hear you, but you can still
hear the other party.
To mute the PC or mobile audio:
1. Press .
LED indicators illuminate solid red. The LCD screen indicates that the audio is muted
To un-mute the PC or mobile audio:
1. Press again.
Creating Conference Calls with the PC or Mobile Audio
To create a conference call with the PC or mobile audio, do one of the following:
- If you have an active PC or mobile audio, press the Conf soft key, and then place a new call
to the other party. Press the Conf soft key again when the party answers the call.
- If you have an active PC or mobile audio and a call or conference call on hold, press the
Conf soft key.
Note
Adjusting the Volume of the PC or Mobile Audio
You can adjust the volume of the PC or mobile audio on your conference phone or on the PC or
mobile device.
To adjust the volume of the PC or mobile audio:
1. When you connect the PC or mobile audio, press to adjust the volume of the
conference phone’s speaker.
Removing the PC or Mobile Audio
To remove the PC or mobile audio, disconnect the 3.5mm jack cable from the conference
phone.
The conference phone can set up five-way conference call with the PC or mobile audio. For more
information on how to set up a conference call, refer to Local Conference on page 87.