User Guide for the CP860 HD IP Conference Phone
84
to in the Forward to field.
3) Press the or soft key to select the ring time to wait before forwarding from
the After Ring Time field.
The default ring time is 12 seconds.
4) (Optional.) Enter the no answer forward on code or off code respectively in the
On Code or Off Code field.
4. Press the Save soft key to accept the change or the Back soft key to cancel.
The icon on the idle screen indicates that the call forward is activated.
Call forward is configurable via web user interface at the path Features->Forward&DND.
Note
To configure the forward authorized numbers via web user interface:
1. Click on Features->Forward&DND.
2. Select Enabled from the pull-down list of Forward Emergency.
3. Enter the numbers in the Forward Authorized Numbers field.
For multiple numbers, enter a comma between every two numbers.
4. Click Confirm to accept the change.
When call forward is activated on the phone, the phone cannot forward incoming calls
from the numbers specified in the Forward Authorized Numbers field.
Note
You can also enter the SIP URL or IP address in the Forward to field. For more information on
using the SIP URL or IP address, refer to Placing Calls on page 72.
Call forward is local to the phone, and may be overridden by the server settings. Call forward on
code or off code may be different between servers. For more information, contact your system
administrator.
Forward authorized number is configurable via web user interface only.
To Next Page
Loading...
