| Setting the Camera | 16
4. Long press Preset 1/Preset 2/Preset 3, select Save position to create or reset the preset.
Renaming Presets in a Meeting
Procedure
1. During a meeting, tap Camera Control.
2. Long press Preset 1/Preset 2/Preset 3, select Rename.
3. Enter the name for the preset.
4. Tap OK.
Setting Camera to the Preset Position
Procedure
1. During a meeting, tap Camera Control.
2. Select Preset 1/Preset 2/Preset 3.
The camera will be set to the corresponding preset position.
Related tasks
Creating/Resetting Presets in a Meeting
Adjusting the Camera Exposure
• Configuring Auto Exposure Mode
• Configuring Manual Exposure Mode
• Configuring the Mode of Shutter Priority
• Configuring the Mode of Brightness Priority
Configuring Auto Exposure Mode
The auto-exposure feature can achieve the desired brightness level (or so-called target brightness level) in
different lighting conditions and scenes, so that the videos or images captured are neither too dark nor too
bright.
Procedure
1. On the idle screen, tap Settings > General > System Settings > Exposure Settings.
2. Select Auto Exposure from the pop-up menu of Exposure mode.
3. Configure and save the following settings:
Parameter Description
Exposure Compensation
Configure the value of exposure compensation.
The exposure compensation is used to compensate the camera
effectively when the camera is shooting in a backlit environment. If the
environment light is dark, you can increase the compensation value.
Note: The value can be any integer from -6 to 6. The default value is 0.
To Next Page
Loading...
