Yealink MeetingBar A20 - MeetingBar A30 Hardware

| Deployment and Connection | 6
Port Name Description
①
VCH port Connects to PoE adapter for power supply and for the
network and data transmission.
②
Reset Key Resets to factory defaults.
Related Documents
The following related documents are available:
• Yealink CTP18 Quick Start Guide (EN, CN, DE, ES, FR) V1.0.pdf
• Yealink MeetingBar A20 Teams&Zoom Quick Start Guide (EN, CN, DE, FR, ES) V1.0.pdf
Technical Specifications
Operating System Android 9.0
Software Zoom Rooms
Processor/SSD/
RAM
Qualcomm Snapdragon 845 chip
Port
• 2 x HDMI HD video output (CEC supported)
• 1 x RJ45VCH port for connecting VCH51
• 1 x USB2.0 port
• 1 x 10/100/1000M Ethernet port
• 1 x Power port
• 1 x Reset slot
• 1 x Security slot
CTP18
• Android 9.0
• 8-inch IPS FHD capacitive touch screen
• Power over Ethernet
• Conference control
• Presentation
Deployment and Connection
This chapter mainly introduces the deployment and connection of MeetingBar A20 for Zoom Rooms.
CTP18 is connected to MeetingBar A20 in the same LAN through IP pairing, and acts as the controller of
MeetingBar A20 for Zoom Rooms.
• Deployment and Connection of MeetingBar A20
• Deployment and Connection of CTP18
• Recommended Deployment Solution