| Introduction | 14
Port Name Description
①
Reset key Resets to factory defaults.
②
DC48V port Connects to the power source via a power adapter.
③
Video Out port Connects to a PC as a video output.
④
Microphone port Connects to VCM34. It is not available in current version.
⑤
USB port (optional) Inserts the BT42 to connect to the CPW90-BT. It is not
available in current version.
⑥
Line In port Connects to an audio input device using a 3.5mm audio
cable.
⑦
Security slot Creates a secure connection to the device with a universal
security cable to lock the device down.
UVC30 Room
You can use the UVC30 Room as the primary camera in the meeting room or as a content camera.
The UVC30 Room is directly connected to the MCore via USB cable.
MTouch
Port Name Description
①
Human Motion
Sensor
The motion detection sensor can automatically wake up the
system and light up the touch screen when people approaches
the touch screen.
②
USB port Connects to Mini-PC and MTouch is powered by Mini-PC.
To Next Page
Loading...
