Yealink SIP-T41S User Manual

Basic Call Features
141
Joining Two Calls in a Conference
You can select a hold call to join into a conference call with the active call.
Procedure:
1. Place two or more calls using the same or different accounts on the phone.
2. Select the desired call for conference and ensure that the call is active.
3. Press Conference (Conf).
4. Select a desired hold call, and then press Send.
On the SIP-T48S/T48G IP phone, tap the desired hold call from the left sidebar.
The active call and the selected hold call are joined into a conference. If there are multiple
hold calls, the other hold calls on the same or different accounts remain hold.
You can also set up a conference call when performing attended transfer (refer to Performing a
Semi-attended/Attended Transfer), press Conference (Conf) after talking with the transferee
party.
Holding/Resuming a Conference Call
When you place a conference call on hold, both the other two participants are placed on hold.
The other two participants cannot hear the audio of each other until you resume the held
conference call.
Procedure:
1. Press the HOLD key or Hold to place the conference on hold.
Downloaded from ManualsNet.com search engine

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm