Yealink SIP-T41S User Manual

User Guide for T4 Series IP Phones
144
4. Enter the conference URI (for example, conference@example.com) in the Conference URI
field.
5. Click Confirm.
Setting Up a Network Conference
Procedure:
1. Place a call to the first party.
2. Press Conference (Conf) to place a new call.
The active call is placed on hold.
3. Enter the number of the second party, and then press the OK key, # key or Send.
4. When the second party answers the call, press Conference (Conf) to add the second party
to the conference.
5. Press Conference (Conf) to place a new call.
The conference call is placed on hold.
6. Enter the number of the new party, and then press the OK key, # key or Send.
7. When the new party answers the call, press Conference (Conf) to add the new party to the
conference.
8. Repeat steps 5 to 7 until you add all intended parties.
The procedures for setting up a network conference call on specific servers may be different
from introduced above. Contact your system administrator for more information.
Call Park/Retrieve
You can use call park feature to place a call on hold, and then retrieve the call from another
Downloaded from ManualsNet.com search engine

Yealink SIP-T41S Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Keypad illumination	Yes
Wi-Fi	No
Networking standards	IEEE 802.3af
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet LAN interface type	Fast Ethernet
Supported network protocols	SIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Volume control	Digital
Number of programmable keys	6
Lines quantity	6 lines
Phonebook capacity	1000 entries
Dual-Tone Multi-Frequency (DTMF) modes	In-band, Out-of band, SIP info
Input frequency	50/60 Hz
AC adapter input voltage	100 - 240 V
AC adapter output current	1.2 A
AC adapter output voltage	5 V
Display diagonal	2.7 \
Display resolution	192 x 64 pixels
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Voice codecs	CNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Certification	CE
Cables included	LAN (RJ-45)
Number of handles included	1 pc(s)
Harmonized System (HS) code	85171800

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	223 mm
Package width	246 mm
Package height	120 mm