User Guide for T4 Series IP Phones
76
If Auto is selected, the phone will use the default account when placing calls to the contact
from the local directory.
6. Select the desired ring tone from the Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group ring
tone (refer to Adding Groups) >Account ring tone (refer to Ring Tones) >Phone ring tone
(refer to Ring Tones).
7. On the SIP-T46S/T46G IP phone, highlight the Photo field, and then press Enter.
8. On the SIP-T48S/T48G/T46S/T46G IP phone, select a desired photo from the Photo field.
9. Press Save.
On the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, press Add.
If the contact already exists in the local directory, the LCD screen will prompt “Contact name
existed?”.
Adding contacts is configurable via web user interface at the path Directory->Local Directory.
For more information on how to add a contact from history/remote phone book, refer to
Adding a Contact to the Local Directory/Blacklist/Adding a Contact to the Local
Directory/Blacklist.
Editing Contacts
Procedure:
1. Press Directory (Dir) or navigate to Menu->Directory->Local Directory to enter the local
directory.
On the SIP-T48S/T48G IP phone, tap Directory or navigate to Menu->Directory->All
Contacts.
2. Enter the desired contact group.
If the contact is not in any group, enter the All Contacts.
3. Highlight a desired contact, and then press Option. Select Detail.
On the SIP-T48S/T48G IP phone, tap after the desired contact.
4. Edit the contact information.
On the SIP-T48S/T48G IP phone, you can tap or to switch the contact you want to
edit.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
Weight and Dimensions
