Yealink SIP-T46G Guide

Basic Call Features
87
You can configure the phone to pick up an incoming call by using the
DPickup/GPickup soft key. You can also configure the call pickup code on a global or
per-line basis via web user interface.
Note
Direct Call Pickup
To enable the direct call pickup via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the Call Pickup to expand the feature list.
3. Select Enabled from the pull-down list of Direct Call Pickup.
4. Enter the direct call pickup code in the Direct Call Pickup Code field.
5. Click Confirm to accept the change.
Note
To configure the direct call pickup code on a per-account basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced under the Account tab.
4. Enter the direct call pickup code in the Direct Call Pickup Code field.
5. Click Confirm to accept the change.
If there are many incoming calls at the same time, press the Gpickup key on the phone
will pick up the call that rings first.
The direct pickup code above is configured on a global, which applies to all accounts.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm