Yealink SIP-T46G Guide

User Guide SIP-T46G IP Phone
88
To pick up a call directly:
1. Pick up the handset.
The DPickup soft key appears on the LCD screen.
2. Press the DPickup soft key on your phone when the specific phone receives an
incoming call.
3. Enter the specific phone number.
4. Press the DPickup soft key.
The call is answered on your phone.
You can also configure a DSS key as a direct pickup key via phone user interface or
web user interface. You can pick up the call by pressing the direct pickup key directly.
Group Call Pickup
To enable the group call pickup via web user interface:
1. Click on Phone->Features.
2. Click the “+” sign on the left of the Call Pickup to expand the feature list.
3. Select Enabled from the pull-down list of Group Call Pickup.
4. Enter the group call pickup code in the Group Call Pickup Code field.
5. Click Confirm to accept the change.
Note
The group pickup code above is configured on a global, which applies to all accounts.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm