EasyManuals Logo
Home>Yealink>IP Phone>SIP-T5 Series

Yealink SIP-T5 Series User Manual

Yealink SIP-T5 Series
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
189
Values 1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Packets Lost
Parameter
phone_setting.vq_rtcpxr_display_symm_oneway_delay.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display SymmOneWayDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > SymmOneWayDelay
Parameter
phone_setting.vq_rtcpxr_display_round_trip_delay.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display RoundTripDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > RoundTripDelay
Parameter
phone_setting.vq_rtcpxr_display_moslq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-LQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-LQ
Parameter
phone_setting.vq_rtcpxr_display_moscq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-CQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-CQ
Central Report Collector
To operate with the central report collector, the phones must be configured to forward their voice quality reports to
the specified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T5 Series and is the answer not in the manual?

Yealink SIP-T5 Series Specifications

General IconGeneral
BrandYealink
ModelSIP-T5 Series
CategoryIP Phone
LanguageEnglish

Related product manuals