Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
228
3. Click the Convert button.
Then you can find the DOB logo files in the adv directory.
Custom Logo Configuration
The following table lists the parameters you can use to configure the custom logo.
Parameter
phone_setting.lcd_logo.mode <y0000000000xx>.cfg
Description
It configures the logo shown on the LCD screen.
Permitted
Values
0-Off, the phone is not allowed to display a logo.
1-System Logo, the LCD screen will display the system logo.
2-Custom Logo, the LCD screen will display the custom logo (you need to upload a custom logo file to
the IP phone).
Default
0
Supported
Devices
All black-and-white screen phones
Web UI
Features > General Information > Use Logo
Parameter
lcd_logo.url <y0000000000xx>.cfg
Description
It configures the access URL of the custom logo file.
Note: It works only if “phone_setting.lcd_logo.mode” is set to 2 (Custom Logo).
To Next Page
Loading...
Need help?
General
