Advanced Features
482
Press OK on the phone to allow remote control. The phone will return to the previous screen.
Refresh the web page.
The browser will display an image of the phone’s current screen. You can save the image to your local sys-
tem.
l Else, the browser will display an image of the phone’s current screen directly. You can save the image to
your local system.
Note: Frequent capture may affect phone performance. Yealink recommends you to capture the phone screen display within
a minimum interval of 4 seconds.
Example: Placing a Call via Web User Interface
Procedure
1. Navigate to Directory > Phone Call Info.
2. Select the desired account from the Outgoing Identity drop-down menu.
3. Enter the callee’s number in the Dial Number field.
4. Click Dial to dial out the number.
The web user interface prompts “Call Success” and the phone will automatically dial out the number.
You can click Hang Up to end the call.
To Next Page
Loading...
Need help?
General
