Specify the Auto Redial interval
Enable the function and put on the headset, when there has a
incoming call ,you can press the answer key or line key to
answer the call through the headset ,and it‟s the same if enable
auto answer function.
Enable Call Completion by selecting it, If the callee is busy, the
sip server will inspect the callee status at intervals. If the callee
is idle, the server will send notify message to inform the caller
whether redial.
Disable this feature, in standby interface next number, will
realize the number rules ”send out over the time”;Enable the
feature ,then the number will not be send out over the time.
Enable Call Waiting by selecting it. then the phone reminds
whether redial, when the caller is busy or rejects . if it‟s ok and
the phone finds out that the caller is idle by sip message, it will
reminds whether redial
Enable 3-way conference by selecting it
If select it, the phone will accept the call even if the called
number is not belong to the phone.
The phone will hang up and return to the idle automatically at
hands-free mode
Specify Auto Hand down Time, the phone will hang up and
return to the idle automatically after Auto Hand down Time at
hands-free mode, and play dial tone Auto Hand down Time at
handset mode
Enable Ring From Handset by selecting it, the phone plays
ring tone from handset
Enable Intercom Mode by selecting it
Enable mute mode during the intercom call
If the incoming call is intercom call, the phone plays the
intercom tone
Enable Intercom Barge by selecting it, the phone auto answers
the intercom call during a call. If the current call is intercom
call, the phone will reject the second intercom call
Enable Silent Mode by selecting it, the phone light will red
blink to remind that there is a missed call instead of playing
ring tone
To Next Page
Loading...
Need help?
General
