Enable Turn Off Power Light by selecting it
Specify the Emergency Call Number. Despite the keyboard is
locked ,you can dial the emergency call number
Enable Password Dial by selecting it, When number entered is
beginning with the password prefix, the following N numbers
after the password prefix will be hidden as *, N stand for the
value which you enter in the Password Length field. For
example: you set the password prefix is 3, enter
the Password Length is 2, then you enter the number 34567, it
will display 3**67 on the phone
Specify the prefix of the password call number
Specify the Password length
Specify Reject Return Code
Specify the hide DTMF mode
Specify the Push XML Server, when phone receives request, it
will determine whether to display corresponding content on the
phone which sent by the specified server or not.
Set Prefix in peer to peer IP call. For example: what you want
to dial is 192.168.1.119, If you define P2P IP Prefix as
192.168.1., you dial only #119 to reach 192.168.1.119. Default
is “.”. If there is no “.” Set, it means to disable dialing IP.
Specify the server IP that remote control phone for
corresponding operation.
Disdale this function ,you will not hear the tone “beep” when
there have multiple incoming calls
Specify the Action URL that Record the operation of phone,
send these corresponding information to server, url：
http://InternalServer /FileName.xml?（InternalServer is server
ip，FileName is name of xml that contains the action message ）
To Next Page
Loading...
Need help?
General
