Yealink T27P - Page 481

Configuring Advanced Features
467
Parameters
Permitted Values
Default
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv6 Config->IPv6 Static DNS
Phone User Interface:
None
network.ipv6_internet_port.ip
IPv6 address
Blank
Description:
Configures the IPv6 address when the IP address mode is configured as IPv6 or IPv4
& IPv6, and the Internet (WAN) port type for IPv6 is configured as Static IP Address.
Example:
network.ipv6_internet_port.ip = 2026:1234:1:1:215:65ff:fe1f:caa
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv6 Config->Static IP Address->IP Address
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port->IPv6->Static IPv6 Client->IPv6 IP
network.ipv6_prefix
Integer from 0 to 128
64
Description:
Configures the IPv6 prefix when the IP address mode is configured as IPv6 or IPv4 &
IPv6, and the Internet (WAN) port type for IPv6 is configured as Static IP Address.
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->IPv6 Config->Static IP Address->IPv6 Prefix (0~128)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->WAN Port->IPv6->Static IPv6 Client->IPv6 IP Prefix
network.ipv6_internet_port.gateway
IPv6 address
Blank