Yealink T27P User Manual

Advanced Features
99
Check with your system administrator to find out if this feature is available on your phone.
Topics
State Indicator of Remote Line by BLF List Key
Picking up a Remote Call by BLF List Key
Transferring a Call by BLF List Key
Retrieving a Call by BLF List Key
Barging In an Active Call by BLF List Key
State Indicator of Remote Line by BLF List Key
An idle screen is similar to the one shown below:
The following table shows the LED/icon indicator associated with the line you are monitoring.
LED Status Icons Description
Solid green Monitored line is idle.
Fast-flashing red
Monitored line is ringing.
Monitored line is dialing.
Solid red Monitored line is busy or in a call.
Slow-flashing red
Monitored line places a call on hold.
A call is parked to the monitored line.
Off Monitored line fails to register or does not exist.
Picking up a Remote Call by BLF List Key
When a monitored line receives an incoming call, you can pick up the incoming call by pressing the BLF List key. For
example, if the monitor user is not at his/her desk and someone rings his/her line, you can pick up the call simply by
pressing the flashing BLF List key.
Check with your system administrator to find out if this feature is available on your phone.
Procedure
1. Pressing the BLF List key to pick up the call for the monitored line directly.

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)