Yealink T27P User Manual

Customizing Your Phone
33
4. Make sure your mobile phone is showing the same passkey, and then press OK on both mobile phone and IP
phone.
A message is displayed on the LCD screen:
5. (Optional.) Press OK to enable the mobile contacts sync feature and the IP phone will sync the mobile contacts tem-
porarily, or press Cancel to disable mobile contacts sync feature and the IP phone will not sync the mobile con-
tacts.
Note
If you enable mobile contacts sync feature, you also need to authorize the IP phone to sync the contacts temporarily on the
mobile phone.
Related Topics
Activating the Bluetooth Mode
Syncing the Mobile Contacts to the IP Phone
Syncing the Mobile Contacts to the IP Phone
You can sync mobile contacts to your IP phone. This is a convenient way to view a contact without accessing your
mobile phone.
Topics
Enabling the Mobile Contacts Sync Feature
Viewing your Mobile Contacts on the IP Phones
Disabling the Mobile Contacts Sync Feature
Enabling the Mobile Contacts Sync Feature
Before You Begin
Make sure that the Bluetooth-Enabled mobile phone is paired and connected to your IP phone.

Yealink T27P Specifications

General

Wall Mountable	Yes
Local Phonebook	1000 entries
Bluetooth	No
Wi-Fi	No
Gigabit Ethernet	No
Display	3.66" 240x120 pixel graphical LCD with backlight
Audio Features	HD voice, Full-duplex speakerphone
Network	Dual-port 10/100 Ethernet switch
Protocols	SIP v1 (RFC2543), v2 (RFC3261)
Power	IEEE 802.3af PoE
Connectivity	2 x RJ45 10/100M Ethernet ports
Voice Codecs	G.711(A/μ), G.722, G.723, G.729AB, G.726
EHS	Supports EHS with Plantronics headsets
Headset Port	Yes
Power Adapter	5V DC (optional)