Audio Settings
39
By default, the Auto is selected, and this group will use the ring tone according to the priority: Contact ring tone>Ac-
count ring tone>Phone ring tone. If a specific ring tone is selected, this group will use the ring tone according to the
priority: Contact ring tone>Group ring tone.
Note
You can only set a ring tone for a group that is added manually.
Procedure
1. Press Directory or navigate to Menu->Directory->Local Directory to enter the local directory.
2. Highlight a desired group.
3. Press Option, and then select Detail.
4. Select a desired ring tone from the Ring field.
The ring tone is played automatically. You can press the Volume key to adjust the ringtone volume.
5. Press Save to accept the change.
Related Topics
Adjusting the Audio Volume
Setting a Ring Tone for a Contact
You can select a unique ring tone for various contacts in your directory. This helps you quickly identify callers accord-
ing to the phone rings.
By default, the Auto is selected, and this contact uses the ring tone according to the priority: Group ring tone>Ac-
count ring tone>Phone ring tone.
Procedure
1. Press Directory or navigate to Menu->Directory->Local Directory to enter the local directory.
2. Enter the desired contact group.
If the contact is not in any group, enter the All Contacts.
3. Highlight a desired contact, and then press Option. Select Detail.
4. Select a desired ring tone from the Ring field.
The ring tone is played automatically. You can press the Volume key to adjust the ringtone volume.
5. Press Save.
Related Topics
Adjusting the Audio Volume
Setting the Key Tone
You can set the phone to produce a sound when pressing the keypad keys. The key tone is enabled by default.
Procedure
1. Navigate to Menu->Basic->Sound->Key Tone.
2. Select the desired value from the Key Tone field.
3. Press Save.
To Next Page
Loading...
Need help?
General
