Yealink T42G - Page 13

Adding Contacts
Adding Contacts Manually
To add a contact to a local directory manually:
1. Press the Directory soft key.
The IP Phone enters the local directory directly as there is only Local Directory enabled in
the directory by default.
If the Local Directory is removed from the directory, press Menu → Directory → Local
Directory to enter the Local Directory.
2. Select the desired contact group and press the Enter soft key.
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
Note: If the contact already exists in the directory, the LCD screen will prompt “Contact name
existed!”
Adding Contacts from Call History
To add a contact to a local directory from Call History:
1. Press the History soft key.
2. Press or to highlight the desired entry.
3. Press the Option soft key, and then select Add to Contacts from the prompt list.
4. Enter the contact name.
5. Press the Save soft key to accept the change.