Yealink W90B

| Call Features | 35
• Network Conference
Local Conference
You can initiate a three-way (including yourself) conference calls with your contacts on the phone.
• Setting Up a Local Conference Call
• Merging Two Calls into a Conference
• Muting/Unmuting a Conference Call
• Ending a Conference Call
Setting Up a Local Conference Call
You can set up a local conference call with up to two contacts.
Procedure
1. Place a call to the first party.
2. When the first party answers the call, select Options > Conference.
On the CP930W/DD phone, select Conference.
The active call is placed on hold.
3. Dial the second party’s number.
4. When the second party answers the call, select Conference to invite two parties to join the conference.
Merging Two Calls into a Conference
You can invite a held call into a conference call with the active call.
Procedure
1. Place two calls on the phone.
2. Select Options > Conference.
On the CP930W/DD phone, select Conf.
Muting/Unmuting a Conference Call
When you mute the local microphone during a conference call, other participants can hear each other
except you.
Procedure
1. Press the MUTE key to mute the conference.
2. Press the MUTE key again to unmute the conference.
Ending a Conference Call
You can end the current conference call at any time.
Procedure
Press or End.
Hybrid UC Meeting
You can create a hybrid UC meeting on the CP930W by different ways.
• Creating a Hybrid UC Meeting with Mobile Phone
• Creating a Hybrid UC Meeting with PC