| Connecting a Mobile Phone to your CP930W via Bluetooth | 66
Connecting a Mobile Phone to your CP930W via
Bluetooth
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32 feet). The best
performance is in the range of 1 to 2 meters (3 to 6 feet).
You can pair and connect the Bluetooth-enabled mobile phone with your phone. After connection, you can
do the following:
• Make and receive mobile calls on the phone
• Use the phone as a Bluetooth speaker for your mobile phone to play music.
• Merge the calls on your phones, the PC and connected mobile phone into a hybrid UC conference
It is only applicable to CP930W.
• Activating the Bluetooth Mode
• Pairing and Connecting the Bluetooth-enabled Mobile Phone
• Enabling the Phone Audio
• Enabling the Phone Media
• Handling a Mobile Phone Call on the Phone
• Editing Device Name of Your Phone
• Making the Phone Discoverable
• Deleting the Paired Bluetooth Device
• Disconnecting the Bluetooth Device
• Deactivating the Bluetooth Mode
Related tasks
Creating a Hybrid UC Meeting with Mobile Phone and PC
Activating the Bluetooth Mode
You should activate the Bluetooth mode first when you need to connect the Bluetooth device to your phone.
Procedure
1.
Tap or go to Menu > Settings > Basic Settings > Bluetooth.
2. Select On from the Bluetooth field.
3. Confirm the action.
Pairing and Connecting the Bluetooth-enabled Mobile Phone
The phone cannot scan the Bluetooth devices, so you have to pair and connect the phone from your
Bluetooth-enabled mobile phone.
Before you begin
Make sure you have activated the Bluetooth mode and made the phone discoverable.
Procedure
1. Scan and pair the phone from the Bluetooth-enable mobile phone (the default device name of your
phone is "Yealink-CP930W").
To Next Page
Loading...
