Yealink W90B

| Audio Settings | 62
Switching on Silent Mode
You can silence an incoming call by switching on silence mode to stop your phone from ringing.
Procedure
Long press the * key until the phone prompts “All Ring Tones Off”.
The silent icon appears in the status bar.
Switching off Silent Mode
If you want to resume the incoming ring, you can switch off silent mode.
Procedure
Long press the * key until the phone prompts “All Ring Tones On”.
The silent icon disappears from the status bar.
Audio Settings
You can change the basic audio settings on your phone.
• Adjusting the Volume
• Setting the Ring Tone
• Setting the Advisory Tone
• Setting the Vibrator
• Setting the Key Tone
• Disabling the Noise Cancellation
Adjusting the Volume
You can adjust the volume of the ringer, media, and audio during a call.
Procedure
Do one of the following:
• Press the Volume key.
• Press the left or right navigation key when the handset is idle.
• Go to OK > Settings > Audio > Ring Tones > Volume and press the left or right navigation key.
On the CP930W, press the Volume touch key.
On the DD phone, press the Volume key .
Setting the Ring Tone
Ring tones are used to indicate the incoming calls.
• Setting the Ring Tone for the External Calls