Need help?Do you have a question about the YEC ’04 YZF-R1 and is the answer not in the manual?
General| Displacement | 998cc |
|---|---|
| Transmission | 6-speed |
| Final Drive | Chain |
| Rear Brakes | 220mm disc, single-piston caliper |
| Front Tire | 120/70-ZR17 |
| Rear Tire | 190/50-ZR17 |
| Frame | Aluminum Deltabox |
| Engine Type | Liquid-cooled inline 4-cylinder, DOHC, 20 valves |
| Torque | 78.2 ft-lbs @ 10, 500 rpm |
| Fuel Capacity | 4.8 gallons |
| Fuel System | Fuel Injection |
| Ignition | TCI |
| Front Suspension | 43mm inverted telescopic fork, adjustable preload, compression and rebound damping |
| Rear Suspension | Single shock, adjustable preload, compression and rebound damping |
| Front Brakes | Dual 320mm discs, 4-piston calipers |
| Wheelbase | 54.9 in |
Lists all components included in the basic kit set for the motorcycle.
Details specific components and parts related to the motorcycle's engine.
Details specific components and parts related to the motorcycle's chassis.
Lists miscellaneous parts and tools not categorized elsewhere.
Procedure for inspecting valve and valve seats for proper condition and fit.
Guide for selecting the correct crankshaft bearing based on journal size.
Guide for selecting the correct connecting rod bearing based on size.
Steps for assembling the piston, piston ring, and connecting rod.
Procedure for correctly installing the crankcase, including tightening sequences.
Instructions for proper cylinder head bolt tightening using a calibrated wrench.
Instructions for the correct installation of camshafts.
Procedure for installing the cam chain tension device correctly.
Steps for securely mounting the engine to the motorcycle frame.
Procedure for installing the front wheel axle and related components.
To Next Page