YL9170 RI Detector
Chapter 3. Operation
There are three LEDs in front of YL9170 RI detector.
POWER LED turns ON if main power turns on
PURGE LED turns ON during cell purging
PORALITY LED indicates the polarity of signal output
About 2 minutes later after power-up, you can control and operate YL9170 RI detector by YL-Clarity.
3-1. YL-Clarity Chromatograph software
3-1-1. Installation of YL9170 RI detector
Open YL-Clarity software and select Configuration on the main window. On the system configuration
window, click [ADD] button and select YL9170.
L9170
5
To Next Page
Loading...