Need help?Do you have a question about the YL Instruments YL9100 HPLC and is the answer not in the manual?
General| Pressure Ripple | < 1% |
|---|---|
| Wavelength Accuracy | ± 1 nm |
| Temperature Stability | ± 0.1 °C |
| Flow Rate Range | 0.001 ~ 10.000 mL/min |
| Flow Rate Accuracy | ±1% |
| Flow Rate Precision | < 0.1% RSD |
| Drift | 2×10⁻⁴ AU/h |
| Injection Volume Range | 10-100 μL |
| Injection Precision | RSD < 0.5% |
| Column Oven Temperature Range | Ambient +5 °C |
| Power Requirements | 50/60 Hz |
Details the technical specifications of the YL9101 Vacuum Degasser.
Outlines requirements for installing the YL9101 Vacuum Degasser.
Details how to connect the power supply for the YL9101 Vacuum Degasser.
Instructions for connecting tubing for the YL9101 Vacuum Degasser.
Explains the process of degassing solvent using the YL9101.
How to operate the solvent delivery pump.
Important safety and operational cautions for the YL9101.
Steps to resolve common problems with the YL9101.
Lists detailed technical specifications for the YL9110 Quaternary Pump.
Guidelines for inspecting and preparing the installation site for the YL9110.
Instructions for connecting the power supply to the YL9110.
Details on connecting tubing for the YL9110.
Initial steps and setup required before operating the YL9110.
Describes error messages and their meanings for the YL9110.
General cautions for maintaining the YL9110 pump.
Step-by-step guide for replacing high pressure seals.
Instructions for replacing the plunger in the YL9110 pump.
Table of problems, causes, and solutions for the YL9110.
Lists detailed technical specifications for the YL9111 Binary Pump.
Guidelines for inspecting and preparing the installation site for the YL9111.
Instructions for connecting the power supply to the YL9111.
Details on connecting tubing for the YL9111.
Initial steps and setup required before operating the YL9111.
Describes error messages and their meanings for the YL9111.
General cautions for maintaining the YL9111 pump.
Step-by-step guide for replacing high pressure seals.
Instructions for replacing the plunger in the YL9111 pump.
Table of problems, causes, and solutions for the YL9111.
To Next Page