3-15
IM 04P02B01-01E
Names of Parts and Run Operations
3
3.9 Clearing the Alarm Printout Buffer
Alarm information waiting to be printed is temporarily stored in the buffer memory. This
operation clears all of the alarm information in the buffer. This function can be used to
prevent unneeded alarm printouts from being executed.
Procedure
1. Press the
FUNC
key.
2. Press the key to select Buffer clear and then press the key.
Func=Buffer clear
3. Press the key to select Alarm and then press the key.
The data in the alarm printout buffer is cleared. The screen returns to the data
display screen.
Buffer clear=Alarm
* When the key or key is pressed while holding down the SHIFT key, the operation is
reversed as when the respective key is pressed by itself.
To Next Page
Loading...
Need help?
General
