4-7
IM 04P02B01-01E
Common Operations for Setting Functions and Setup Guide
4
Menu Structure of Setting Mode
Below are the setup items in Setting mode. Information indicated inside the parentheses
is references.
Clock
Aux
Zone
Partial
Chart
Unit
Alarm
Bias
Range CH
CH Bias Bias
CH Level
CH
CH Left Right
CH Partial Expand
Boundary
mm/h
(Date/Time)
Unit
Mode
TypeAlarm
Relay numberRelay
Value
Range Span left Span right
Range Span left Span right
Range Span left Span right
Range Span left Span right
Range Span left Span right
Ref.CH Span left Span right
Span left Span right
Scale right Low-cut
Scale left
Type Range Span left
Span right Scale left
Scale right
Scale left Scale right
Low-cut Low-cut point
Volt
TC
RTD
Scale
Delta
SQRT
1-5V
DI
Skip
Trend
Print out
Tag
Message
Chart 2
Moving_AVE
Filter
Alarm delay time
Brightness
Formula
Unit
Constant
Alarm
TLOG
Aux
Math
CH Trend
Message number (Message)
CH
CH
CH
CH
CH
CH
Mode
Unit
formula
Span left Span right
K##Number
CH
CH
CH Left Right
CH
CH Trend
CH
CH
Periodic
Tag
Duration
Level
Timer number
Alarm
SUM scale
Type
Value Relay
Relay number
Zone
Partial Partial
Expand
Boundary
Print out
Tag
Alarm delay itme
Display
Number of samples
Response Time
Duration
Light
DST
Start monthDST Start time
mm/h
Tag
Periodic
are not displayed in the default
condition. To display these items,
settings must be changed in Basic
Setting mode.
(section 5.1)
(section 6.12)
(section 5.2)
(section 5.3)
(section 5.4)
(section 5.5)
(section 6.1)
(section 6.4)
(section 6.5)
(section 6.6)
(section 6.7)
(section 6.8)
(section 6.9)
(section 6.3)
(section 6.2)
(section 6.10)
(section 6.11)
(section 6.13)
(section 9.2)
(section 9.3)
(section 9.4)
(section 9.5)
(section 9.6)
(section 9.7)
(section 9.8)
(section 9.9)
(section 9.10)
(section 9.11)
Key operation
Hold down the MENU key for 3 seconds
in Operation mode to enter Setting mode.
Hold down the MENU key for 3 seconds
in Setting mode to return to Operation mode.
Hold down both the and keys
for 3 seconds in Setting mode to enter
Basic Setting mode.
:
:
Use the
Use the
key.
key.
Start day End month End timeEnd day
4.3 Menu Structure, Settings, and List of Default Values