IM CA500-02EN
3
Checking the Contents of the Package
To prevent condensation, before opening the package, allow it to adjust to the
ambient temperature. In particular, if you move the package from a cool location to a
hot location, allow it to adjust to the ambient temperature for at least an hour before
opening the package.
Unpack the box, and check the following before operating the instrument. If the
wrong items have been delivered, if items are missing, or if there is a problem with
the appearance of the items, contact your nearest YOKOGAWA dealer.
CA500/CA550
Check that the product that you received is what you ordered by referring to the
model name on the name plate on the rear panel of the main unit. For reference, the
model name and specifications of the products are listed below.
MODEL Suffix Code* Description
CA500 -F1
**
Multifunction process calibrator
CA550
-F2
***
Multifunction process calibrator (with HART
communication function)
HART/BRAIN (CA550 only)
-F3
***
HART (CA550 only)
* For products whose suffix code contains “Z,” an exclusive manual may be
included. Please read it along with the standard manual.
** A model without either the HART or BRAIN communication function. This suffix
code is always added for the CA500.
*** Either F2 or F3 is always added for the CA550.
Please contact your dealer for sales area.
HART/BRAIN communication function will be supported in the near future.
No. (Instrument number)
When contacting the dealer from which you purchased the instrument, please give
them the instrument number.
To Next Page
Loading...
Need help?
General
