YOKOGAWA DL350 Getting Started Guide

2-10
IM DL350-03EN
2.4 Installing Input Modules
Removal Procedure
1.
Make sure that the instrument is turned off.
2.
Loosen the two screws that are fastened to the input module.
3.
Hold the two handles at the top and bottom of the input module, and pull it out.
About the High-Speed 100 MS/s, 12-Bit Isolation Module
Safety Precautions for Laser Products
The High-Speed 100 MS/s, 12-Bit Isolation Module (720211 (HS100M12)) uses an internal laser light
source. The 720211 (HS100M12) is a class 1 laser product as defined by IEC 60825-1: Safety of Laser
Products—Part1: Equipment Classification, and Requirements. In addition, this instrument complies with
21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007.
High-Speed 100 MS/s, 12-Bit Isolation Module (720211 (HS100M12))
The following information is printed on the side.
DL350
The following information is printed on the rear.

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English