4.6 GPS Signal Input
CAUTION
Only apply signals that meet the following specifications. Signals that do not meet the
specifications may damage the instrument because of factors such as excessive voltage.
French
ATTENTION
Appliquer uniquement des signaux respectant les spécifications ci-dessous. Les signaux ne
respectant pas les spécifications risquent d’endommager l'instrument, à cause de facteurs tels
que la surtension.
GPS Signal Input Terminal
You can use a GPS (Global Positioning System) signal to set the time on this instrument.
Item Specifications
Input connector 9-pin Mini DIN
Compatible GPS unit 720940/B8093YA (optional accessory)
* The figure is based on results obtained when the GPS unit is installed in a location with good line of sight to
GPS satellites. The accuracy may not be attained depending on the measurement location, the location of
satellites when the measurement is taken, the weather, and influence caused by obstruction.
To Next Page
Loading...
Need help?
General
