2.16 Connecting an Acceleration Sensor
Precautions
• Do not apply shock outside the specifications (see the manual for the acceleration sensor) to the
acceleration sensors. Doing so can damage the sensors.
• Do not impose drastic temperature changes on the acceleration sensors. Temperature changes
may affect the output value of the acceleration sensors.
• By default, the bias current on the acceleration sensors is turned off. Be sure to turn it on before
using the acceleration sensors. Bias current is valid only when measuring acceleration. When
measuring other parameters, it is automatically turned off. The bias current on/off setting is saved
when the instrument is turned off.
To Next Page
Loading...
