4-111
IM DL350-17EN
Commands
4
:GONogo:COUNt?
Function Queries the number of GO/NO-GO
determinations that were performed.
Syntax
:GONogo:COUNt?
Example
:GONOGO:COUNT? -> :GONOGO:COUNT 10
:GONogo:LOGic
Function Sets or queries the GO/NO-GO determination
logic.
Syntax
:GONogo:LOGic {AND|OR}
:GONogo:LOGic?
Example
:GONOGO:LOGIC AND
:GONOGO:LOGIC? -> :GONOGO:LOGIC AND
:GONogo:MODE
Function Sets or queries the GO/NO-GO determination
mode.
Syntax
:GONogo:MODE {OFF|PARameter|ZONE}
:GONogo:MODE?
Example
:GONOGO:MODE ZONE
:GONOGO:MODE? -> :GONOGO:MODE ZONE
:GONogo:NGCount?
Function Queries the GO/NO-GO determination NO-GO
count.
Syntax
:GONogo:NGCount?
Example
:GONOGO:NGCOUNT?
-> :GONOGO:NGCOUNT 10
:GONogo:PARameter?
Function Queries all parameter determination settings.
Syntax
:GONogo:PARameter?
:GONogo:PARameter:ITEM<x>?
Function Queries all settings for the specified waveform
parameter for parameter determination.
Syntax
:GONogo:PARameter:ITEM<x>?
<x> = 1 to 8
:GONogo:PARameter:ITEM<x>:CAUSe?
Function Queries whether the specified waveform
parameter for parameter determination is the
cause of a NO-GO judgment.
Syntax
:GONogo:PARameter:ITEM<x>:CAUSe?
<x> = 1 to 8
Example
:GONOGO:PARAMETER:ITEM1:CAUSE?
-> :GONOGO:PARAMETER:ITEM1:CAUSE 1
Description When the parameter is the cause of a NO-GO
result, the instrument returns 1. Otherwise, the
instrument returns 0.
:
GONogo:PARameter:ITEM<x>:LOGic:BIT
Function Sets or queries the bit when the the specified
waveform parameter’s source waveform for
parameter determination is set to 720230 (logic
module).
Syntax
:GONogo:PARameter:ITEM<x>:LOGic:
BIT {<NRf>}
:GONogo:PARameter:ITEM<x>:LOGic:BIT?
<x> = 1 to 8
<NRf> = 1 to 8
Example
:GONOGO:PARAMETER:ITEM:LOGIC:BIT 2
:GONOGO:PARAMETER:ITEM:LOGIC:BIT?
-> :GONOGO:PARAMETER:ITEM:LOGIC:
BIT 2
:GONogo:PARameter:ITEM<x>:MODE
Function Sets or queries the specified waveform
parameter’s reference condition for parameter
determination.
Syntax
:GONogo:PARameter:ITEM<x>:MODE {OFF|
IN|OUT}
:GONogo:PARameter:ITEM<x>:MODE?
<x> = 1 to 8
Example
:GONOGO:PARAMETER:ITEM1:MODE IN
:GONOGO:PARAMETER:ITEM1:MODE?
-> :GONOGO:PARAMETER:ITEM1:MODE IN
:GONogo:PARameter:ITEM<x>:TRACe
Function Sets or queries the specified waveform
parameter’s source waveform for parameter
determination.
Syntax
:GONogo:PARameter:ITEM<x>:
TRACe {<NRf>[,<NRf>]|MATH<x>}
:GONogo:PARameter:ITEM<x>:TRACe?
<x> = 1 to 8
MATH<x>’s <x> = 1, 2
First <NRf> = 1 to 4 (channel number
designation)
Second <NRf> = 1, 2 (only on a 4-CH module
(720254))
Example
:GONOGO:PARAMETER:ITEM1:TRACE 1
:GONOGO:PARAMETER:ITEM1:TRACE?
-> :GONOGO:PARAMETER:ITEM1:TRACE 1
4.14 GONogo Group (Scope mode only)