To Next Page

To Previous Page

4-135

IM DL350-17EN

Commands

App

Index

:MEASure:CHANnel<x1>:BIT<x2>:DELay:R

EFerence:LOGic:BIT

Function Sets or queries the reference waveform bit used

to measure the delay of the specified bit of the

specified channel.

Syntax

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:BIT {<NRf>}

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:BIT?

<x1> = 1 to 6

<x2> = 1 to 8

<NRf> = 1 to 8

Example

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:BIT 1

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:BIT?

-> :MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:BIT 1

Description • This command is valid on logic input channels.

• This command is valid when the channel

specified by the :MEASure:CHANnel<x1>:

BIT<x2>:DELay:REFerence:TRACe command

is a logic module channel.

:MEASure:CHANnel<x1>:BIT<x2>:DELay:R

EFerence:SLOPe

Function Sets or queries the edge polarity of the reference

waveform used to measure the delay of the

specified bit of the specified channel.

Syntax

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:SLOPe {RISE|FALL}

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:SLOPe?

<x1> = 1 to 6

<x2> = 1 to 8

Example

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SLOPE FALL

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SLOPE?

-> :MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SLOPE FALL

Description This command is valid on logic input channels.

:MEASure:CHANnel<x1>:BIT<x2>:DELay:R

EFerence:SOURce

Function Sets or queries whether to set the reference

for measuring the delay of the specified bit of

the specified channel to a trigger point or to a

waveform.

Syntax

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:SOURce {TRACe|TRIGger}

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:SOURce?

<x1> = 1 to 6

<x2> = 1 to 8

Example

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SOURCE TRACE

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SOURCE?

-> :MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:SOURCE TRACE

Description This command is valid on logic input channels.

:MEASure:CHANnel<x1>:BIT<x2>:DELay:R

EFerence:TRACe

Function Sets or queries the reference waveform trace

used to measure the delay of the specified bit of

the specified channel.

Syntax

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:TRACe {<NRf>[,<NRf>]|

MATH<x3>}

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

REFerence:TRACe?

<x1> = 1 to 6

<x2> = 1 to 8

<x3> = 1 to 6

<NRf> = 1 to 5

Example

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:TRACE 1

:MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:TRACE?

-> :MEASURE:CHANNEL1:BIT1:DELAY:

REFERENCE:TRACE 1

Description This command is valid on logic input channels.

:MEASure:CHANnel<x1>:BIT<x2>:DELay:S

TATe

Function Sets or queries the display format of the delay of

the specified bit of the specified channel.

Syntax

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

STATe {TIME|OFF|DEGRee}

:MEASure:CHANnel<x1>:BIT<x2>:DELay:

STATe?

<x1> = 1 to 6

<x2> = 1 to 8

Example

:MEASURE:CHANNEL1:BIT1:DELAY:

STATE TIME

:MEASURE:CHANNEL1:BIT1:DELAY:STATE?

-> :MEASURE:CHANNEL1:BIT1:DELAY:

STATE TIME

Description This command is valid on logic input channels.

4.22 MEASure Group

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English

YOKOGAWA DL350 User Manual

Table of Contents

Other manuals for YOKOGAWA DL350

Questions and Answers:

YOKOGAWA DL350 Specifications

Related product manuals