YOKOGAWA DL350 - Page 185

4-158
IM DL350-17EN
:TRIGger:ATRigger:CHANnel<x>[:CONDit
ion]
Function Sets or queries the state of the specified channel
of the specified logic channel of condition A.
Syntax
:TRIGger:ATRigger:CHANnel<x>[:
CONDition] {DONTcare|HIGH|LOW}
:TRIGger:ATRigger:CHANnel<x>[:
CONDition]?
<x> = 1 to 4, 7
Example
:TRIGGER:ATRIGGER:CHANNEL1:
CONDITION HIGH
:TRIGGER:ATRIGGER:CHANNEL1:
CONDITION?
-> :TRIGGER:ATRIGGER:CHANNEL1:
CONDITION HIGH
Description Use this command on channels that do not have
sub channels.
:TRIGger:ATRigger:CHANnel<x1>:SCHann
el<x2>[:CONDition]
Function Sets or queries the state of the specified sub
channel of the specified logic channel of condition
A.
Syntax
:TRIGger:ATRigger:CHANnel<x1>:
SCHannel<x2>[:CONDition] {DONTcare|
HIGH|LOW}
:TRIGger:ATRigger:CHANnel<x1>:
SCHannel<x2>[:CONDition]?
<x1> = 1 to 4, 7
<x2> = 1 to 60 (sub channel, depends on the
module)
Example
:TRIGGER:ATRIGGER:CHANNEL3:
SCHANNEL1:CONDITION HIGH
:TRIGGER:ATRIGGER:CHANNEL3:
SCHANNEL1:CONDITION?
-> :TRIGGER:ATRIGGER:CHANNEL3:
SCHANNEL1:CONDITION HIGH
Description Use this command on channels that have sub
channels.
:TRIGger:ATRigger:CONDition
Function Sets or queries the achievement condition of
condition A.
Syntax
:TRIGger:ATRigger:CONDition {ENTer|
EXIT|FALSe|TRUE}
:TRIGger:ATRigger:CONDition?
Example
:TRIGGER:ATRIGGER:CONDITION ENTER
:TRIGGER:ATRIGGER:CONDITION?
-> :TRIGGER:ATRIGGER:CONDITION ENTER
Description This command is valid when the trigger type is
ABN or ADB.
:TRIGger:BBETween?
Function Queries all B Between trigger settings.
Syntax
:TRIGger:BBETween?
:TRIGger:BBETween:TIME<x>
Function Sets or queries a pulse width for B Between
triggers.
Syntax
:TRIGger:BBETween:TIME<x> {<Time>}
:TRIGger:BBETween:TIME<x>?
<x> = 1, 2
<Time> = 10ns to 10s
Example
:TRIGger:BBET:TIME1 0.001
:TRIGGER:BBETWEEN:TIME1?
-> :TRIGGER:BBETWEEN:
TIME11.00000000E−03
:TRIGger:BGTime?
Function Queries all B>Time trigger settings.
Syntax
:TRIGger:BGTime?
:TRIGger:BGTime:TIME
Function Sets or queries the pulse width for B>Time
triggers.
Syntax
:TRIGger:BGTime:TIME {<Time>}
:TRIGger:BGTime:TIME?
<Time> = 10ns to 10s
Example
:TRIGGER:BGTIME:TIME 0.001
:TRIGGER:BGTIME:TIME?
-> :TRIGGER:BGTIME:
TIME1.00000000E−03
:TRIGger:BLTime?
Function Queries all B<Time trigger settings.
Syntax
:TRIGger:BLTime?
:TRIGger:BLTime:TIME
Function Sets or queries the pulse width for B<Time
triggers.
Syntax
:TRIGger:BGTime:TIME {<Time>}
:TRIGger:BGTime:TIME?
<Time> = 20ns to 10s
Example
:TRIGGER:BLTIME:TIME 0.001
:TRIGGER:BLTIME:TIME?
-> :TRIGGER:BLTIME:
TIME1.00000000E−03
4.33 TRIGger Group