YOKOGAWA DL350 - Page 187

4-160
IM DL350-17EN
:TRIGger:DELay
Function Sets or queries the delay.
Syntax
:TRIGger:DELay {<Time>}
:TRIGger:DELay?
<Time> = 0 to 10s (the resolution varies
depending on the sample rate)
(1/sample rate) × (1/10)
The minimum resolution is 10 ns.
If the sample rate is higher than 10 MS/s, the
resolution will be 10 ns.
Example
:TRIGGER:DELAY 0.001
:TRIGGER:DELAY?
->:TRIGGER:DELAY1.0000000E−03
Description When an external clock is in use, the delay is
fixed to 0.
:TRIGger:EOA?
Function Queries all Edge On A trigger settings.
Syntax
:TRIGger:EOA?
:TRIGger:EOA:CHANnel<x1>:BIT<x2>
Function Sets or queries the state of the specified bit of the
specified logic channel for Edge On A triggers.
Syntax
:TRIGger:EOA:CHANnel<x1>:
BIT<x2> {OFF|FALL|RISE}
:TRIGger:EOA:CHANnel<x1>:BIT<x2>?
<x1> = 1 to 6
<x2> = 1 to 8
Example
:TRIGGER:EOA:CHANNEL5:BIT1 RISE
:TRIGGER:EOA:CHANNEL5:BIT1?
-> :TRIGGER:EOA:CHANNEL5:BIT1 RISE
:TRIGger:EOA:CHANnel<x1>:SCHannel<x2
>:BIT<x3>
Function Sets or queries the state of the specified bit of
the specified sub channel of the specified logic
channel for Edge On A triggers.
Syntax
:TRIGger:EOA:CHANnel<x1>:
SCHannel<x2>:BIT<x3> {OFF|FALL|RISE}
:TRIGger:EOA:CHANnel<x1>:
SCHannel<x2>:BIT<x3>?
<x1> = 1 to 4, 7
<x2> = 1 to 60 (sub channel)
<x3> = 1 to 8
Example
:TRIGGER:EOA:CHANNEL3:SCHANNEL1:
BIT1 RISE
:TRIGGER:EOA:CHANNEL3:SCHANNEL1:
BIT1?
-> :TRIGGER:EOA:CHANNEL3:SCHANNEL1:
BIT1 RISE
:TRIGger:EOA:CHANnel<x>[:CONDition]
Function Sets or queries the state of the specified channel
of the specified logic channel for Edge On A
triggers.
Syntax
:TRIGger:EOA:
CHANnel<x>[:CONDition] {OFF|FALL
|RISE}
:TRIGger:EOA:CHANnel<x>[:CONDition]?
<x> = 1 to 4, 7
Example
:TRIGGER:EOA:CHANNEL3:CONDITION FALL
:TRIGGER:EOA:CHANNEL3:CONDITION?
-> :TRIGGER:EOA:CHANNEL3:
CONDITION FALL
Description Use this command on channels that do not have
sub channels.
:TRIGger:EOA:CHANnel<x1>:SCHannel<x2
>[:CONDition]
Function Sets or queries the state of the specified sub
channel of the specified logic channel for Edge
On A triggers.
Syntax
:TRIGger:EOA:CHANnel<x1>:
SCHannel<x2>[:CONDition] {OFF|FALL|
RISE}
:TRIGger:EOA:CHANnel<x1>:
SCHannel<x2>[:CONDition]?
<x1> = 1 to 4, 7
<x2> = 1 to 60 (sub channel, depends on the
module)
Example
:TRIGGER:EOA:CHANNEL3:SCHANNEL1:
CONDITION RISE
:TRIGGER:EOA:CHANNEL3:SCHANNEL1:
CONDITION?
-> :TRIGGER:EOA:CHANNEL3:SCHANNEL1:
CONDITION RISE
Description Use this command on channels that have sub
channels.
:TRIGger:EOA:CONDition
Function Sets or queries the achievement condition for
Edge On A triggers.
Syntax
:TRIGger:EOA:CONDition {FALSe|TRUE}
:TRIGger:EOA:CONDition?
Example
:TRIGGER:EOA:CONDITION TRUE
:TRIGGER:EOA:CONDITION?
-> :TRIGGER:EOA:CONDITION TRUE
:TRIGger:MODE
Function Sets or queries the trigger mode.
Syntax
:TRIGger:MODE {AUTO|NORMal|SINGle|
ONSTart}
:TRIGger:MODE?
Example
:TRIGGER:MODE AUTO
:TRIGGER:MODE? -> :TRIGGER:MODE AUTO
4.33 TRIGger Group