YOKOGAWA DL350 User Manual

4-161
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:TRIGger:OR?
Function Queries all OR trigger settings.
Syntax
:TRIGger:OR?
:TRIGger:OR:CHANnel<x1>:BIT<x2>
Function Sets or queries the state of the specified bit of the
specified logic channel for OR triggers.
Syntax
:TRIGger:OR:CHANnel<x1>:
BIT<x2> {OFF|FALL|RISE}
:TRIGger:OR:CHANnel<x1>:BIT<x2>?
<x1> = 1 to 6
<x2> = 1 to 8
Example
:TRIGGER:OR:CHANNEL5:BIT1 RISE
:TRIGGER:OR:CHANNEL5:BIT1?
-> :TRIGGER:OR:CHANNEL5:BIT1 RISE
:TRIGger:OR:CHANnel<x1>:SCHannel<x2>
:BIT<x3>
Function Sets or queries the state of the specified bit of
the specified sub channel of the specified logic
channel for OR triggers.
Syntax
:TRIGger:OR:CHANnel<x1>:
SCHannel<x2>:BIT<x3> {OFF|FALL|RISE}
:TRIGger:OR:CHANnel<x1>:
SCHannel<x2>:BIT<x3>?
<x1> = 1 to 4, 7
<x2> = 1 to 60 (sub channel)
<x3> = 1 to 8
:TRIGger:OR:CHANnel<x>[:CONDition]
Function Sets or queries the state of the specified channel
of the specified logic channel for OR triggers.
Syntax
:TRIGger:OR:CHANnel<x>[:
CONDition] {OFF|FALL|RISE|WINIn|
WINOut}
:TRIGger:OR:CHANnel<x>[:CONDition]?
<x> = 1 to 4, 7
Example
:TRIGGER:OR:CHANNEL1:CONDITION RISE
:TRIGGER:OR:CHANNEL1:CONDITION?
-> :TRIGGER:OR:CHANNEL1:
CONDITION RISE
Description Use this command on channels that do not have
sub channels.
:TRIGger:OR:CHANnel<x1>:SCHannel<x2>
[:CONDition]
Function Sets or queries the state of the specified sub
channel of the specified logic channel for OR
triggers.
Syntax
:TRIGger:OR:CHANnel<x1>:
SCHannel<x2>[:CONDition] {OFF|FALL|
RISE|WINIn|WINOut}
:TRIGger:OR:CHANnel<x1>:
SCHannel<x2>[:CONDition]?
<x1> = 1 to 4, 7
<x2> = 1 to 60 (sub channel)
Example
:TRIGGER:OR:CHANNEL3:SCHANNEL1:
CONDITION RISE
:TRIGGER:OR:CHANNEL3:SCHANNEL1:
CONDITION?
-> :TRIGGER:OR:CHANNEL3:SCHANNEL1:
CONDITION RISE
Description Use this command on channels that have sub
channels.
:TRIGger:OR:EXTernal:TYPE
Function Sets or queries the type of external trigger that is
used with OR triggers.
Syntax
:TRIGger:OR:EXTernal:TYPE {OFF|FALL|
RISE}
:TRIGger:OR:EXTernal:TYPE?
Example
:TRIGGER:OR:EXTERNAL:TYPE RISE
:TRIGGER:OR:EXTERNAL:TYPE?
-> :TRIGGER:OR:EXTERNAL:TYPE RISE
:TRIGger:OUT?
Function Queries all trigger output settings.
Syntax
:TRIGger:OUT?
:TRIGger:OUT:PRATe (Pulse rate)
Function Sets or queries the pulse output rate for when the
trigger output terminal output type is 3 (Sample
Pulse).
Syntax
:TRIGger:OUT:PRATe {<Frequency>}
:TRIGger:OUT:PRATe?
<Frequency> = 5Hz, 10Hz, 20Hz, 50Hz, 100Hz,
200Hz, 500Hz, 1kHz, 2kHz, 5kHz, 10kHz,
20kHz, 50kHz, 100kHz, 200kHz
:TRIGger:OUT:TIME
Function Sets or queries the H-pulse interval that is used
when the trigger output terminal output type is 1
(Pulse).
Syntax
:TRIGger:OUT:TIME {<Time>}
:TRIGger:OUT:TIME?
<Time> = 1ms, 50ms, 100ms, 500ms
Example
:TRIGGER:OUT:TIME 0.05
:TRIGGER:OUT:TIME?
->:TRIGGER:OUT:TIME50.000000E−03
4.33 TRIGger Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English