4-19
IM DL350E-17EN
Commands
4
4.1 List of Commands
Command Function page
:HCOPy:PSETup:ANNotation
Sets or queries the annotation printing on/off setting for printing to a Brother
PocketJet printer in Long Print mode.
4-118
:HCOPy:PSETup:ANType
Sets or queries the annotation print content for printing to a Brother
PocketJet printer in Long Print mode.
4-118
:HCOPy:PSETup:{CHANnel<x1>[:
SCHannel<x2>]|MATH<x3>}:MESSage
Sets or queries the annotation message strings of each channel for printing
to a Brother PocketJet printer in Long Print mode.
4-118
:HCOPy:PSETup:GAUGe
Sets or queries the gauge print on/off setting for printing to a Brother
PocketJet printer in Long Print mode.
4-118
:HCOPy:PSETup:GWIDth (Grid
Width)
Sets or queries the width of the vertical scale on the print grid for printing to
a Brother PocketJet printer in Long Print mode.
4-118
:HCOPy:PSETup:TIME
Sets or queries the time print setting for waveform printing on a Brother
PocketJet printer in Long Print mode.
4-118
HISTory Group (Scope mode only)
:HISTory?
Queries all of the settings for the history feature. 4-119
:HISTory:CLEar
Clears the data of all history waveforms. 4-119
:HISTory:DATE?
Queries the trigger date of the data at the specified record number. 4-119
:HISTory:DISPlay
Sets or queries the history start and end numbers that will be displayed. 4-119
:HISTory:DMODe (Display MODE)
Sets or queries the history waveform display mode. 4-119
:HISTory:RECord
Sets or queries the source record. 4-119
:HISTory:RECord? MINimum
Queries the minimum record number. 4-119
:HISTory:TIME?
Queries the time reference point of the data at the specified record number. 4-119
IMAGe Group
:IMAGe?
Queries all screen capture data output settings. 4-120
:IMAGe:BACKground
Sets or queries the screen capture background (png). 4-120
:IMAGe:EXECute
Saves the screen capture data. 4-120
:IMAGe:FORMat
Sets or queries the screen capture output format. 4-120
:IMAGe:SAVE?
Queries all file output settings. 4-120
:IMAGe:SAVE:ANAMing
Sets or queries the on/off setting of the auto naming feature for saving files. 4-120
:IMAGe:SAVE:CDIRectory
Changes the output destination directory. 4-120
:IMAGe:SAVE:DRIVe
Sets the output destination medium. 4-120
:IMAGe:SAVE:NAME
Sets or queries the name of the file that will be saved. 4-120
:IMAGe:SAVE:PATH?
Queries the current directory. 4-120
:IMAGe:SEND?
Queries the screen capture data. 4-120
:IMAGe:TONE
Sets or queries the color tone of the screen capture data that will be saved. 4-120
INITialize Group
:INITialize:EXECute
Initializes the settings. 4-121
LSTart Group (Scope mode only)
:LSTart (Log STart)
Starts waveform acquisition immediately. 4-122
:LSTart?
Starts waveform acquisition immediately, and waits for acquisition to
complete.
4-122
MATH Group
:MATH<x>?
Queries all computation settings. 4-123
:MATH<x>:AVERage?
Queries all averaging computation settings. 4-123
:MATH<x>:AVERage:CCOunt
Sets or queries the cycle count of cycle averaging. 4-123
:MATH<x>:AVERage:COUNt
Sets or queries the average count of linear averaging. 4-123
:MATH<x>:AVERage:EWEight
Sets or queries the attenuation constant of exponential averaging. 4-123
:MATH<x>:AVERage:MODE
Sets or queries the average type. 4-123
:MATH<x>:AVERage:TYPE
Sets or queries the averaging domain. 4-123
:MATH<x>:AVALue
Sets or queries the scaling coefficient A value of basic arithmetic with
coefficients.
4-123
:MATH<x>:BVALue
Sets or queries the scaling coefficient B value of basic arithmetic with
coefficients.
4-123
:MATH<x>:CVALue
Sets or queries the offset C value of basic arithmetic with coefficients. 4-124
:MATH<x>:BINary?
Queries all binary computation settings. 4-124
To Next Page
Loading...
