YOKOGAWA DL350 User Manual

4-61
IM DL350-17EN
Commands
1
2
3
4
5
App
Index
:CHANnel<x>:SENT:FORMat:MULTiplex
Function Sets or queries the on/off state of Fast Channel
Multiplexing of the SENT port.
Syntax
:CHANnel<x>:SENT:FORMat:
MULTiplex {<Boolean>}
:CHANnel<x>:SENT:FORMat:MULTiplex?
<x1> = 1 to 4
Example
:CHANNEL1:SENT:FORMAT:MULTIPLEX 1
:CHANNEL1:SENT:FORMAT:MULTIPLEX?
-> :CHANNEL1:SENT:FORMAT:MULTIPLEX 1
:CHANnel<x>:SENT:FORMat:PPULse (Pause
Pulse)
Function Sets or queries whether pause pulses are to be
included in FastCH messages of SENT signals.
Syntax
:CHANnel<x>:SENT:FORMat:
PPULse {<Boolean>}
:CHANnel<x>:SENT:FORMat:PPULse?
<x> = 1 to 4
Example
:CHANNEL1:SENT:FORMat:PPULSE ON
:CHANNEL1:SENT:FORMat:PPULSE?
-> :CHANNEL1:SENT:FORMat:PPLUSE ON
:CHANnel<x>:SENT:FORMat:SCHType (Slow
CH Type)
Function Sets or queries the Slow CH type of a SENT
signal.
Syntax
:CHANnel<x>:SENT:FORMat:
SCHType {SHORt|ENH4|ENH8}
:CHANnel<x>:SENT:FORMat:SCHType?
<x> = 1 to 4
SHORt = Short (ID 4bit + Data 8bit) type
ENH4 = Enhanced (ID 4bit + Data 16bit) type
ENH8 = Enhanced (ID 8bit + Data 12bit) type
Example
:CHANNEL1:SENT:FORMat:SCHTYPE ENH8
:CHANNEL1:SENT:FORMat:SCHTYPE?
-> :CHANNEL1:SENT:FORMat:
SCHTYPE ENH8
:CHANnel<x>:SENT:ERRor?
Function Queries all error settings of a SENT monitor
module.
Syntax
:CHANnel<x>:SENT:ERRor?
<x> = 1 to 4
:CHANnel<x>:SENT:ERRor:COUNt?
Function Queries all error count channel settings of a
SENT monitor module.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt?
<x> = 1 to 4
:CHANnel<x>:SENT:ERRor:COUNt:FCRC
(Fast Channel CRC)
Function Sets or queries whether fast channel CRC errors
of a SENT signal are to be integrated in error
count channels.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
FCRC {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:FCRC?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:COUNT:FCRC ON
:CHANNEL1:SENT:ERROR:COUNT:FCRC?
-> :CHANNEL1:SENT:ERROR:COUNT:
FCRC ON
:CHANnel<x>:SENT:ERRor:COUNt:MRESet:
EXECute (Manual Reset)
Function Resets the error count channel value of a SENT
signal.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:MRESet:
EXECute
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:TRIGGER:MRESET:
EXECUTE
:CHANnel<x>:SENT:ERRor:COUNt:NVALue
(Nibble Value)
Function Sets or queries whether nibble value errors of a
SENT signal are to be integrated in error count
channels.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
NVALue {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:NVALue?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:COUNT:NVALUE ON
:CHANNEL1:SENT:ERROR:COUNT:NVALUE?
-> :CHANNEL1:SENT:ERROR:COUNT:
NVALUE ON
:CHANnel<x>:SENT:ERRor:COUNt:PNUMber
(Pulse Number)
Function Sets or queries whether pulse number errors of
a SENT signal are to be displayed in error count
channels.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
PNUMber {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:
PNUMber?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:TRIGGER:
PNUMBER ON
:CHANNEL1:SENT:ERROR:TRIGGER:
PNUMBER?
-> :CHANNEL1:SENT:ERROR:TRIGGER:
PNUMBER ON
4.6 CHANnel Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English