YOKOGAWA DL350 User Manual

4-62
IM DL350-17EN
:CHANnel<x>:SENT:ERRor:COUNt:SCPulse
(Succesive Calibration Pulse)
Function Sets or queries whether successive calibration
pulse errors of a SENT signal are to be integrated
in error count channels.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
SCPulse {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:
SCPulse?
<x> = 1 to 4
Example
:CHANNEL9:SENT:ERROR:COUNT:
SCPULSE ON
:CHANNEL9:SENT:ERROR:COUNT:SCPULSE?
-> :CHANNEL9:SENT:ERROR:COUNT:
SCPULSE ON
:CHANnel<x>:SENT:ERRor:COUNt:SCRC
(Slow Channel CRC)
Function Sets or queries whether slow channel CRC errors
of a SENT signal are to be integrated in error
count channels.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
SCRC {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:SCRC?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:COUNT:SCRC ON
:CHANNEL1:SENT:ERROR:COUNT:SCRC?
-> :CHANNEL1:SENT:ERROR:COUNT:
SCRC ON
:CHANnel<x>:SENT:ERRor:COUNt:SRESet
(Reset on start)
Function Sets or queries whether the error count channel
of a SENT signal is to be reset at start.
Syntax
:CHANnel<x>:SENT:ERRor:COUNt:
SRESet {<Boolean>}
:CHANnel<x>:SENT:ERRor:COUNt:SRESet?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:TRIGGER:
SRESET ON
:CHANNEL1:SENT:ERROR:TRIGGER:SRESET?
-> :CHANNEL1:SENT:ERROR:TRIGGER:
SRESET ON
:CHANnel<x>:SENT:ERRor:DETect?
Function Queries all error detection settings of a SENT
monitor module.
Syntax
:CHANnel<x>:SENT:ERRor:DETect?
<x> = 1 to 4
:CHANnel<x>:SENT:ERRor:DETect:SCPul
se (Successive Calibration Pulse)
Function Sets or queries whether successive calibration
pulse errors of a SENT signal are to be detected.
Syntax
:CHANnel<x>:SENT:ERRor:DETect:
SCPulse {<Boolean>}
:CHANnel<x>:SENT:ERRor:DETect:
SCPulse?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:DETECT:
SCPULSE ON
:CHANNEL1:SENT:ERROR:DETECT:SCPULSE?
-> :CHANNEL1:SENT:ERROR:DETECT:
SCPULSE ON
:CHANnel<x>:SENT:ERRor:TRIGger?
Function Queries all error trigger channel settings of a
SENT monitor module.
Syntax
:CHANnel<x>:SENT:ERRor:TRIGger?
<x> = 1 to 4
:CHANnel<x>:SENT:ERRor:TRIGger:FCRC
(Fast Channel CRC)
Function Sets or queries whether fast channel CRC errors
of a SENT signal are to be displayed in error
trigger channels.
Syntax
:CHANnel<x>:SENT:ERRor:TRIGger:
FCRC {<Boolean>}
:CHANnel<x>:SENT:ERRor:TRIGger:FCRC?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:TRIGGER:FCRC ON
:CHANNEL1:SENT:ERROR:TRIGGER:FCRC?
-> :CHANNEL1:SENT:ERROR:TRIGGER:
FCRC ON
:CHANnel<x>:SENT:ERRor:TRIGger:NVAL
ue (Nibble Value)
Function Sets or queries whether nibble value errors of a
SENT signal are to be displayed in error trigger
channels.
Syntax
:CHANnel<x>:SENT:ERRor:TRIGger:
NVALue {<Boolean>}
:CHANnel<x>:SENT:ERRor:TRIGger:
NVALue?
<x> = 1 to 4
Example
:CHANNEL1:SENT:ERROR:TRIGGER:
NVALUE ON
:CHANNEL1:SENT:ERROR:TRIGGER:NVALUE?
-> :CHANNEL1:SENT:ERROR:TRIGGER:
NVALUE ON
4.6 CHANnel Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English