YOKOGAWA DL350 User Manual

4-68
IM DL350-17EN
:CHANnel<x>:STRain:LSCale:BVALue
Function Sets or queries the scaling coefficient B that is
used during linear scaling for a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
BVALue {<NRf>}
:CHANnel<x>:STRain:LSCale:BVALue?
<x> = 1 to 4
 <NRf>=−9.9999E+30to−1E−30,
1E−30to9.9999E+30
Example
:CHANNEL1:STRAIN:LSCALE:
BVALUE 25.0000E+00
:CHANNEL1:STRAIN:LSCALE:BVALUE?
-> :CHANNEL1:STRAIN:LSCALE:
BVALUE 25.0000E+00
Description The coefficient cannot be set to 0.
:CHANnel<x>:STRain:LSCale:DISPlayty
pe?
Function Queries all the linear-scaling result display-mode
settings of a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
DISPlaytype?
:CHANnel<x>:STRain:LSCale:DISPlaytyp
e:DECimalnum
Function Sets or queries the decimal place that is used
when the linear-scaling result display mode is set
to Float for a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
DISPlaytype:DECimalnum {<NRf>|AUTO}
:CHANnel<x>:STRain:LSCale:
DISPlaytype:DECimalnum?
<x> = 1 to 4
<NRf> = 0 to 3
Example
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
DECIMALNUM AUTO
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
DECIMALNUM?
-> :CHANNEL1:STRAIN:LSCALE:
DISPLAYTYPE:DECIMALNUM AUTO
:CHANnel<x>:STRain:LSCale:DISPlaytyp
e:MODE
Function Sets or queries the linear-scaling result display
mode of a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
DISPlaytype:MODE {EXPonent|FLOating}
:CHANnel<x>:STRain:LSCale:
DISPlaytype:MODE?
<x> = 1 to 4
Example
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
MODE EXPONENT
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
MODE?
-> :CHANNEL1:STRAIN:LSCALE:
DISPLAYTYPE:MODE EXPONENT
:CHANnel<x>:STRain:LSCale:DISPlaytyp
e:SUBunit
Function Sets or queries the unit prefix that is used when
the linear-scaling result display mode is set to
Float for a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
DISPlaytype:SUBunit {AUTO|NONE|PICO|
NANO|MICRo|MILI|KILO|MEGA|GIGA|TERA}
:CHANnel<x>:STRain:LSCale:
DISPlaytype:SUBunit?
<x> = 1 to 4
Example
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
SUBUNIT AUTO
:CHANNEL1:STRAIN:LSCALE:DISPLAYTYPE:
SUBUNIT?
-> :CHANNEL1:STRAIN:LSCALE:
DISPLAYTYPE:SUBUNIT AUTO
:CHANnel<x>:STRain:LSCale:GETMeasure
Function Executes the measurement of the linear scaling
P1:X or P2:X value of a strain module.
Syntax
:CHANnel<x>:STRain:LSCale:
GETMeasure {P1X|P2X}
<x> = 1 to 4
Example
:CHANnel1:STRAIN:LSCale:
GETMeasure P1X
:CHANnel<x>:STRain:LSCale:MODE
Function Sets or queries the linear scaling mode of a strain
module.
Syntax
:CHANnel<x>:STRain:LSCale:MODE {AXB|
OFF|P12|SHUNt}
:CHANnel<x>:STRain:LSCale:MODE?
SHUNt can only be specified when the installed
module is a 701271.
<x> = 1 to 4
Example
:CHANNEL11:STRAIN:LSCALE:MODE OFF
:CHANNEL11:STRAIN:LSCALE:MODE?
-> :CHANNEL11:STRAIN:LSCALE:MODE OFF
4.6 CHANnel Group

YOKOGAWA DL350 Specifications

General

Brand	YOKOGAWA
Model	DL350
Category	Recording Equipment
Language	English