Need help?Do you have a question about the YOKOGAWA DY080 and is the answer not in the manual?
General| Brand | YOKOGAWA |
|---|---|
| Model | DY080 |
| Category | Measuring Instruments |
| Language | English |
Details the model and important specifications indicated on the data plate attached to the case.
Details the installation procedures for wafer and flange type vortex flowmeters, including alignment and gaskets.
Lists important precautions to observe when wiring the instrument, including temperature and cable handling.
Explains wiring methods for analog output, pulse output, and simultaneous analog-pulse output.
Explains the setting mode used for checking and rewriting parameters, including an overview and notes.
Describes the procedure for inputting numeric data and selection items for parameter setting.
Details the method for setting parameters using a BRAIN Terminal (BT200), including flow span and pulse output.
Describes operations using a HART configuration tool, including matching device descriptions and interconnection.
Covers setting required parameters before factory shipment, including fluid, contact out, and display.
Lists principal items for operating the digitalYEWFLO, covering flow span, damping, contact output, and display settings.
Covers adjustment settings, including trimming, user adjust, Reynolds adjustment, density, and viscosity.
Details test procedures for output signals, including analog output, pulse output, and status output.
Provides detailed descriptions of parameters in Item A (Display) and Item B (Easy Setting).
Lists error codes displayed by SELF CHECK, including problem cause, error name, and how to recover.
Covers zero adjustment, span adjustment, loop test, and totalizer function start and value reset.
Details the procedure for loop tests to ensure 4-20mA DC or pulse output accuracy.
Covers manual adjustments for low cut and tuning, to be done when the indicator reads over zero at zero flow.
Describes the procedure for removing the vortex shedder assembly, including cautions and torque values.
Presents equations for calculating flowrate, velocity, and Reynolds number based on generated vortices.
Provides diagnostic flowcharts for errors like large flowmeter errors, fluctuating rates, or zero indication.
Offers a specific flowchart for troubleshooting flow issues when the /MV option is used.
Lists standard specifications including fluid type, accuracy, operating conditions, and mechanical/electrical details.
Lists explosion protection specifications for CENELEC ATEX, FM, CSA, and TIIS certifications.
Provides basic specifications and tools for sizing, including minimum and measurable flow velocities.
Details technical data for CENELEC ATEX certified explosion proof and intrinsically safe instruments.
Provides technical data for explosion proof and intrinsically safe instruments under ATEX certification.
Outlines installation requirements and warnings for ATEX certified instruments, including wiring and conduit seals.
Shows installation diagrams for intrinsically safe instruments, including wiring and safety barrier requirements.
Provides installation diagrams for Type 'n' protection, detailing wiring for integral and remote type instruments.
Details technical data, wiring, operation, maintenance, and installation diagrams for FM certified instruments.
Provides technical data for FM certified explosion proof and intrinsically safe instruments.
Shows installation diagrams for FM certified intrinsically safe and nonincendive instruments.
Details technical data, installation, operation, and maintenance for SAA certified instruments.
Provides technical data for SAA certified flameproof and intrinsically safe instruments.
Outlines installation requirements and warnings for SAA certified instruments, including wiring and hazardous locations.
Shows installation diagrams for SAA certified intrinsically safe and type 'n' instruments.
Details technical data, wiring, operation, maintenance, and installation diagrams for CSA certified instruments.
Provides technical data for CSA certified explosion proof and intrinsically safe instruments.
Provides certificate details for TIIS certified instruments, including model and shedder bar material information.
To Next Page